Infinity Series (ISP) Electric Pump 700 bar (10,000 psi)
The PE45
is an Infinite Stage Electric Pump which increases productivity on the job by providing continuous pressure for up to 2x the speed of typical 2-stage pumps. Jobs get done faster and easier.
Quality means Lower Life-Cycle Costs:
– Over 100,000 cycles
– Continuous duty up to 50°C (122°F) ambient
– Proven design = Proven reliability
Enhanced Usability:
– Light Weight: 32.2 kg (71 lb) [without oil]
– Removable control pendant (5 m/15 ft)
– Removable 100mm (4″), calibration-capable gauge
– Universal Motor for reduced voltage applications (up to -20% nominal voltage)
– 4 tool manifold available powers up to 4 tools from a single pump (not for lifting applications)
– High flow to get work done faster
Designed with Safety in Mind:
– Easily adjusted pressure regulator (relief) valve
– Fixed 103 bar (1,500 psi) retract relief valve pressure
Compact Electric Torque Wrench Pump 700 bar (10,000 psi)
The PE39 is compact and capable of being used in a vertical or horizontal orientation. Based on proven pump design for reliability in rugged torque wrench applications to support operation and maintenance requirements.
Quality means Lower Life-Cycle Costs:
– Over 100,000 cycles
– Continuous duty up to 50˚C (122˚F) ambient
– Proven design = proven reliability
Enhanced Usability:
– Light weight and portable: 17.7 kg (39 lb)
– Removable control pendant (5 m/15 ft cord length)
– Removable 100 mm (4″) calibration-capable gauge
– Universal Motor for reduced voltage applications (up to -20% nominal voltage)
– Vertical or horizontal operation
– Easy install cooling fan as option
Designed with Safety in Mind:
– Easily adjusted pressure regulator (relief) valve
– Fixed 103 bar (1,500 psi) retract relief valve pressure
Classice Electric Hydraulic Pump 700 bar (10,000 psi)
The PE55TWP-BS has been the market leading electric pump for over 30 years & is therefore tried & tested. A simple, light-weight design with a recent upgrade that has created a cost-effective workhorse.
Quality means Lower Life-Cycle Costs:
– Over 100,000 cycles
– Continuous duty up to 50°C (122°F) ambient
– Proven design = Proven reliability
Enhanced Usability:
– Two Speed High Performance pump
– Retract side internal relief valve protects tool
– Hand remote
– Four-tool manifold (-4 models only) allow use of up to four tools simultaneously
– 4″ calibration capable gauge
– Use with single or double acting tools
Designed with Safety in Mind:
– Easily adjusted pressure regulator (relief) valve
– 103 bar (1,500 psi) pressure retract relief valve
PE 60 Series High Pressure Hydraulic Bolting Pump
The Bolting Systems PE60 SERIES High Pressure Hydraulic Bolting Pump is Designed and Configured to Meet A Variety of Tough Bolting Applications
Quality means Lower Cost of Ownership:
– Standard or Intelligent Autocycle technology options for fast bolt/nut rundown
– True unloading valve achieves greater pump efficiency, allowing higher flow at maximum pressure
– Weather resistant control panel and shrouds for motor/electrical protection
Enhanced Usability:
– Hydraulic wrenches driven manually or through a continuous Autocycle operation
– Lightweight and portable. Best performance-to-weight ratio of all Bolting Systems pumps
– Ergonomic remote pendant, large button design, requiring low finger depression force to operate, decreasing operator fatigue
– User friendly LCD / Keypad interface to enable quick setup and maximize productivity
Designed to fit to your application:
– “Plug and Play” field installable accessories including an oil cooler and protective roll cage
– LCD Models provide a host of information including digital pressure visibility, torque, run-time data and diagnostics
– 1.5 or 2.5 gallon deep draw reservoirs with O-ring Lip for leak-free operation
– Single and 4-Port manifold option available for multi-tool use